2 8432978 NOS ALUMINUM 9" BRAKE DRUM 3/4/1-1/4 AXLE SHAFT W/ BEARINGS NO RACES

Description: 10C102 This Item up for Offer is a SET OF (2) P/N 8432978 ALUMINUM 9"ID. X 2-3/4 WIDE SURFACE BRAKE DRUM FITS 3/4" / 1-1/4" AXLE SHAFT BEARINGS 3.292" APART. COMES WITH (4) BEARINGS (2) TIMKEN 11949 (MS19081-9) 3/4" ID. AND (2) TIMKEN LM67048 (8432075) 1-1/4" ID. NOTE RACES IN ONE DRUM ARE RUSTED (PICTURE 8 & 9), AND NEED TO BE REPLACED. ON THE OTHER THEY ARE MISSING (PICTURE 10 & 11) END USE NOT SURE AIRCRAFT, AIR DROP EQUIPMENT??. Condition New and Unused. From Government Surplus Old Stock, Some Minor Rust on Lugs. NSN Number 1015-00-073-0201. Made in the USA for the US MILITARY . NOTE: the front bearing is 3/4 id and the back bearing is 1 1/4 id and they are spaced about 3.292 from front bearing installed to back bearing, there is a seal diameter but no oil grease seal installed. this measures around 2.33 dia x 0.531 deep the break pad area is 9.00 inches x 3 deep. the front has a big thread for a threaded hub cap this measures around 2.194 id x 0.717 deep the studs are 0.519 dia with lug nuts that have a flat washer type seat. 5 equal spaced this measures around 5.206 across from one side to other and are spaced about 3.218 apart. the bearings are clean in a bag sealed but the inner races have some rust but could be cleaned up or replaced? the outer cups are marked ms19081-9 and b8432075 the wheel pilot is 3.921 dia. let me know if you need more measurements from these. "I WELCOME YOUR INTEREST IN THIS ONE, AND ALL MY OTHER ITEMS"

Price: 150 USD

Location: Warren, Michigan

End Time: 2023-12-09T17:40:27.000Z

Shipping Cost: N/A USD