AudioControl All Weather IPX6 4-Band Equalizer & Crossover w/Paging Mic ACX-3.2

Description: Welcome to the UpBeat Store, your ultimate destination for top-tier automotive aftermarket installations, covering both OEM and aftermarket radios with precision and finesse. With over 12 years of specialized experience, trust us to elevate your driving experience seamlessly. This fixed-price listing includes the AudioControl ACX-3.2 is an all-weather sound processor that's designed for on-road, off-road, or off-shore sound systems. It features a 4-band EQ, High/Low crossover, built-in line driver, and a PTT (Push-To-Talk) microphone. The ACX-3.2 can serve as the main control unit in your audio system allowing you to control the output to all your amplifiers. It features a 4-band graphic equalizer that can be used to tweak your system, depending upon your mood or music selection. The built-in crossover gives you the ability to separate high and low frequencies, and send them to the appropriate amplifier and speakers, maximizing the performance of your system. Adding an ACX-3.2 to your system gives you the assurance that your system can play longer, louder, and cleaner with less distortion. The low-profile ACX-3.2 takes your experience to another level by combining all its audio features with a PA microphone. If you are out on your boat ACX-3.2 allows you to play music and communicate with the person wakeboarding or tubing behind you. Own a food truck? This is great for playing music inside for the cooks, outside for the patrons, and allowing you the ability to call out an order number for a waiting customer.The ACX-3.2 is a game changer, offering a quality real-world solution for all of those unique installation needs. This multi-functional piece is part of our all-weather line-up making it the perfect solution for any adventure.What in the box?All-weather sound processorPTT Microphone with attached 4.5' coiled-cable4-Pin terminal block (installed)2 Mounting bracketsMic mounting bracketFour 1/8" screwsTwo 3/8" screwsOwner's manualQuality control information ACX-3.2 Features4-Band Stereo Graphic EQParabass® Low-Frequency ContouringVariable 24 Db/Octave Linkwitz-Riley CrossoverFront, Rear, and Subwoofer OutputsMaster Volume, Fader, and Sub-Level ControlParabass® Bass ControlHigh-Gain Input StageLine Driver: 13-Volts Peak OutputDash or Console-MountableIncluded Paging MicrophoneSelectable Illumination (red or blue)SpecificationsInputsPreamp Inputs: 1 (2 channels)Input Gain: 0-20 dBInput Impedance: 20 kΩ Outputs Preamp Outputs: 6Maximum Output Level: 7.5 Vrms / 9.5 V PeakOutput Impedance: 150 Ω Performance Frequency Response: 20Hz-20kHz ±.01dBTotal Harmonic Distortion: 0.03%Signal to Noise: 123 dB (inputs set to Balanced)EQ Frequencies: 40 Hz – 80 Hz (parametric), 125 Hz, 1.25 kHz, 10 kHzEQ Cut/Boost: ±10 dBCrossover type: 24 dB/octave Linkwitz-RileyFactory Crossover Setting: 100 HzMicrophone Frequency Response: 100 Hz – 6 kHzMicrophone Maximum SPL: 123 dB Control Remote In General Power Supply: High Headroom PWM SwitchingCurrent Draw: 300mARecommended Fuse Rating: 1A Weights & Dimensions Dimensions: 6.75”W x 5”D x 1”HWeight: 1.6lbs Controls: 3-Band Graphic EQ: Three rotary knobs let you adjust the signal +/-12 dB at 125 Hz, 1.25 kHz, and 10 kHz. There's an indent at each knob's center position so it's easy to return to the flat setting.Para-Bass: Para-Bass is a single band, parametric equalizer for the bass output. Like the three graphic EQ bands, the adjustment range is +/-12 dB; the center frequency is continuously variable from 40 Hz to 80 Hz.Equalize: A push-button is used to activate the EQ section; when Off, the EQ will be bypassed.Crossover: The ACX-3.2 has a built-in high-pass/low-pass crossover with dedicated On/Off switch on top of the processor. A corresponding frequency dial lets you select the cutoff frequency with a range of 30-300 Hz. The Linkwitz-Riley crossover has a 24 dB/octave slope. When the crossover On/Off switch is On, high-pass frequencies are applied to the front and rear line outputs while the low-pass is applied to the subwoofer output. If the crossover is Off, a full range signal will be sent to the front and rear outputs and the subwoofer output will still be crossed over at the selected cutoff point.Volume: If you choose, you can adjust the system volume using the ACX-3.2's volume knob. This allows you to leave the source volume at it's maximum un-clipped level, resulting in the best signal to noise ratio and dynamic range output from the source.Subwoofer Level Control: The relative subwoofer volume is adjusted using the rotary Sub Level control on the front panel.Fader: Because there is only one stereo line input and both front and rear line outputs, the front panel fader knob is needed to adjust the relative front and rear volume.Input Level & Indicator: The input signal level for the left and right channels is set using the Level dial, providing 0 dB to +20 dB of gain. A corresponding Maximized LED starts to flicker as you reach the maximum unclipped voltage. PTT Microphone: The ACX-3.2 includes a hand-held Push-to-Talk microphone that lets you communicate through either the front or front & rear outputs. The paging feature is ideal for communicating with wakeboarders or other boaters, food truck order paging, or keeping in touch with other riders while off-roading. A rear-panel Mic Gain dial lets you adjust the signal balance between the mic and your audio.Line Driver: To achieve the best possible signal to noise ratio and dynamic range, the built-in line driver can increase the head unit's output voltage up to 20 dB (up to 7 volts RMS/9.5 volts peak).Connections:Audio Inputs: A single pair of RCA jacks provides the signal input for the processor.Audio Outputs: Three pairs of RCA jacks (Front, Rear, and Subwoofer) provide the outputs for running to outboard power amplifiers.Terminal Block: The power/ground/remote/illumination connections terminate in a removable terminal block that plugs into the rear of the processor and can accommodate wire up to 16-gauge. Additional Settings: Four jumper settings can be accessed by removing the top cover of the ACX-3.2.Balanced Input: Using the balanced differential input circuit may cancel noise picked up in the transmission line between the ACX-3.2 and the source unit. Options include Balanced (default) and Unbalanced.Mic Signal Routing: Determines if microphone signals are fed to the Rear Outputs (default) or Front & Rear Outputs.Ground Isolation: The power supply ground is switchable, in case of ground loop noise. The factory position is fully isolated (typically the best choice), but can be changed to Ground or 200Ω.Illumination: The outer ring of each knob is lit whenever the illumination terminal is energized. The color is switchable between blue and red. The illumination wire can be connected to a factory dash light dimmer, letting you dim the illumination on the processor along with the dash lights. Mounting: The Audio Control ACX-3.2 includes two mounting brackets that allow the processor to be mounted on top of or underneath a console or dash. The PTT microphone also includes a mounting bracket, letting you keep the mic within easy reach. AudioControl Warranty Policy AudioControl products are designed, engineered, and tested at our facility located in the Pacific Northwest, USA. Given our huge commitment to quality, AudioControl comfortably warranties all materials and workmanship on our products for a period of two years from the date of purchase, provided it is installed by an authorized AudioControl dealer. Should you choose to install it yourself, your warranty is one year from the date of purchase from an authorized AudioControl dealer.A Few Words About Warranties People are scared of warranties. Lots of fine print. Months of waiting around. Well, fear no more, this warranty is designed to make you rave about us to your friends. It’s a warranty that looks out for you and helps you resist the temptation to have your friend, “…who’s good with electronics”, try to repair your AudioControl product. So go ahead, read this warranty, then take a few days to enjoy your new AudioControl processor before registering the warranty card and comments.“Conditional” doesn’t mean anything ominous. The Federal Trade Commission tells all manufacturers to use the term to indicate that certain conditions have to be met before they’ll honor the warranty. If you meet all of these conditions, we will warranty all materials and workmanship on your AudioControl product for one year from the date you bought it from an authorized AudioControl dealer (two years if it is installed by an authorized AudioControl dealer). We will fix or replace it, at our option, during that time.Here Are The Conditional Conditions1. You have to go online and register your AudioControl products. Alternatively, you may fill out the Warranty Registration card that came with your product and mail it to us.2. You must keep your sales receipt for proof of purchase showing when and from whom the unit was bought. We’re not the only ones who require this, so it’s a good habit to get into with any major purchase.3. Your AudioControl products must have originally been purchased from an authorized AudioControl dealer. You do not have to be the original owner, but you do need a copy of the original sales slip.4. You cannot let anybody who isn’t: (A) the AudioControl factory; (B) somebody authorized in writing by AudioControl to service your product. If anyone other than (A) or (B) messes with your AudioControl product, that voids your warranty.5. The warranty is also void if the serial number is altered or removed, or if your AudioControl component has been used improperly. Now that sounds like a big loophole, but here is all we mean by it. Unwarranted abuse is: (A) physical damage (don’t use it to level your RV); (B) improper connections (120 volts AC into a 12 volt DC power jack can fry the poor thing); (C) sadistic things (your imagination is best kept private).. This is the best product we know how to build, but if you mount it to the front bumper of your car or use it as a counter-weight for your daughter’s trebuchet project, something will go wrong.6. If an authorized United States AudioControl dealer installs your component, the warranty is two years.Assuming you conform to 1 through 6, and it really isn’t all that hard to do, we get the option of fixing your old unit or replacing it with a new one. To initiate a warranty claim, please contact AudioControl and we will issue an RA (Return Authorization) number and provide shipping instructions. Products received at AudioControl without an RA number will be refused.Legalese Section This is the only warranty given by AudioControl. This warranty gives you specific legal rights that vary from state to state. Promises of how well your AudioControl component will perform are not implied by this warranty. Other than what we have covered in this warranty, we have no obligation, express or implied. Also, we will not be obligated for direct or indirect consequential damage to your system caused by hooking up your AudioControl component.Failure to properly register your AudioControl warranty may negate any service claims. Additional Notes We recommend having a professional certified technician handle the installation. For any questions or concerns about the product, please contact us through the "Contact Seller" feature for technical support or customer assistance.

Price: 299 USD

Location: Fort Lauderdale, Florida

End Time: 2024-09-27T23:10:11.000Z

Shipping Cost: N/A USD