AudioControl Monoblock Amplifier Compact All Weather IPX6 Waterproof ACX-300.1

Description: Welcome to the UpBeat Store, your ultimate destination for top-tier automotive aftermarket installations, covering both OEM and aftermarket radios with precision and finesse. With over 12 years of specialized experience, trust us to elevate your driving experience seamlessly. This fixed-price listing includes the AudioControl ACX-300.1 all weather mono block 300 watts compact amplifier. AudioControl’s ACX-300.1 all-weather amplifier delivers honest power levels to the sound system in your boat, motorcycle, off road vehicles and more. The ACX-300.1 is a mono block system, that will ensure your open-air speakers deliver plenty of punch and clarity, all day long. Installer-friendly, heavy gauge quick-connect wiring makes installation quick and painless, making this all-weather amplifier the perfect solution for your next adventure. The AudioControl ACX-300.1 all-weather amplifier is a compact mono amplifier designed for your boat, ATV, UTV, motorcycle, and more. The all-weather IPX6 waterproof rating amplier can provide 175 watts RMS into a 4Ω load and 300 watts RMS into a 2Ω load. Construction details include conformal circuit board coatings, insulated gaskets for the control panel cover, and waterproof input, output, and power connections. The ACX-300.1 also features both RCA line-level and speaker-level inputs, making it ideal for OEM and aftermarket headunits. This tiny, hand-size amp will fit almost anywhere in almost any kind of vehicle, and it features high-level inputs with signal-sensing turn-on, so it'll work with almost any stereo system. To simplify setup, a "Maximized" LEDs indicate when you've set the amplifier's gains for optimum performance. In The Box ACX-300.1 AmplifierSpeaker and Power ConnectorsManualWarrantyACX-300.1 Features 1 x 300 watts @ 2 ohms1 x 175 watts @ 4 ohmsIPX6 RatedAccuBASS® bass management GTOTM Signal SenseHigh and low input modesLinkwitz-Riley CrossoverBulletproof 5-year warranty (when installed by an authorized AudioControl dealer) High-/Low-Level Inputs The ACX-300.1 includes two built-in 12" RCA inputs that can accept either high- or low-level input signals. If running high-level signals, RCA to speaker-wire adapters must be used (sold separately), or the RCA connectors must be cut off and the bare-ended wire used. Low-Level Input Range: 500mV - 6Vrms High-Level Input Range: 1Vrms - 12Vrms AccuBASS The patented AccuBASS processing circuit compensates for factory bass rolloff to improve bass performance, especially with most factory installed sound systems. The circuit has two rotary controls: the Threshold lets you dial in the level at which the AccuBASS will begin to work, and a Level control that adjusts the amount of AccuBASS compensation. Crossovers The ACX-300.1 includes a 12 dB/octave Linkwitz-Riley low-pass filter with a 3-position switch to change the crossover point. Choices include 80Hz, 120Hz, or Bypass. Gain Maximized LEDs The mono amp's inputs include a Gain control to the properly set the overall output level. A Maximized LED indicator will light to let you know when the output signal has reached its optimum performance level, helping to avoid running a distorted signal to your speakers. GTO (Great Turn On) Signal Sense If you are connecting the amplifier to a factory stereo, or an aftermarket unit without preamp outputs and a remote turn-on lead, the GTO Signal Sense circuitry can turn on the amplifier when an audio signal is detected on either the line-level or speaker-level inputs. After a period with no signal input, the amp will turn itself off. Optional Wired Remote Control The ACX-300.1 amplifier features a female 3.5mm jack on a built-in 12" harness, letting you connect an optional ACR-1 wired remote control (sold separately). A 16.5' ACR-1 connection cable is provided, with a male 3.5mm connector on one end and an RJ-14 connector on the other end, that connects to the wired controller. All-Weather Construction The ACX-300.1 amp has been constructed to withstand outdoor environments and carries an IPX6 waterproof rating, making it impervious to weather. A removable cover-plate on top of the amp protects the controls and LED indicators from dust and moisture ingress. The cover-plate screws require a 2.5mm hex bit for removal (not included). All wire harnesses on the amp are built-in for added weather resistance: Audio Inputs: Two RCA jacks on 12" input cables are provided, each with protective plastic caps. Speaker Output: A 12" 2-pin speaker-wire output is terminated in a waterproof connector and includes a matching 7" harness with bare-ended wire. Power/Ground/Remote: A 12" section of 10ga. power and ground wire terminate in a waterproof connector, with matching 7" harness and bare-ended wire. An additional empty power/ground connector is provided, letting you build your own harness to match the amp's power/ground connector. A bare-ended 12", 18ga. remote turn-on wire is provided in the power/ground harness. Mounting The AudioControl ACX-300.1 features built-in mounting flanges on either end of the amp, with two pre-drilled holes in each, allowing the amp to be mounted in a variety of locations. Four 3/4" screws are provided for mounting. ACX-300.1 Specifications Inputs Preamp/Speaker Level Inputs: 2Input Voltage Low: 500 mV – 6 VrmsInput Voltage Range High: 1 Vrms – 12 Vrms Outputs Rated Continuous (RMS) Power at 14.4V: 4 Ω – 175 W x 1 RMS2 Ω – 300 W x 1 RMS Performance Frequency Response: 26 Hz – 22 kHzSignal to Noise: 102 dBA, Ref 50 W @ 4 OhmTHD+N: < 0.05%Crossover: 12 dB/octave Linkwitz-Riley, 80 Hz, 120 Hz, BypassIP Rating: IPX6 General Recommended Fuse Rating: 30A Weights & Dimensions Dimensions: 9.0″W x 3.875″D x 2.25″HWeight: 2.2 lbs. (3.3 kg) AudioControl Warranty Policy AudioControl products are designed, engineered, and tested at our facility located in the Pacific Northwest, USA. Given our huge commitment to quality, AudioControl comfortably warranties all materials and workmanship on our products for a period of two years from the date of purchase, provided it is installed by an authorized AudioControl dealer. Should you choose to install it yourself, your warranty is one year from the date of purchase from an authorized AudioControl dealer.A Few Words About Warranties People are scared of warranties. Lots of fine print. Months of waiting around. Well, fear no more, this warranty is designed to make you rave about us to your friends. It’s a warranty that looks out for you and helps you resist the temptation to have your friend, “…who’s good with electronics”, try to repair your AudioControl product. So go ahead, read this warranty, then take a few days to enjoy your new AudioControl processor before registering the warranty card and comments.“Conditional” doesn’t mean anything ominous. The Federal Trade Commission tells all manufacturers to use the term to indicate that certain conditions have to be met before they’ll honor the warranty. If you meet all of these conditions, we will warranty all materials and workmanship on your AudioControl product for one year from the date you bought it from an authorized AudioControl dealer (two years if it is installed by an authorized AudioControl dealer). We will fix or replace it, at our option, during that time.Here Are The Conditional Conditions1. You have to go online and register your AudioControl products. Alternatively, you may fill out the Warranty Registration card that came with your product and mail it to us.2. You must keep your sales receipt for proof of purchase showing when and from whom the unit was bought. We’re not the only ones who require this, so it’s a good habit to get into with any major purchase.3. Your AudioControl products must have originally been purchased from an authorized AudioControl dealer. You do not have to be the original owner, but you do need a copy of the original sales slip.4. You cannot let anybody who isn’t: (A) the AudioControl factory; (B) somebody authorized in writing by AudioControl to service your product. If anyone other than (A) or (B) messes with your AudioControl product, that voids your warranty.5. The warranty is also void if the serial number is altered or removed, or if your AudioControl component has been used improperly. Now that sounds like a big loophole, but here is all we mean by it. Unwarranted abuse is: (A) physical damage (don’t use it to level your RV); (B) improper connections (120 volts AC into a 12 volt DC power jack can fry the poor thing); (C) sadistic things (your imagination is best kept private).. This is the best product we know how to build, but if you mount it to the front bumper of your car or use it as a counter-weight for your daughter’s trebuchet project, something will go wrong.6. If an authorized United States AudioControl dealer installs your component, the warranty is two years.Assuming you conform to 1 through 6, and it really isn’t all that hard to do, we get the option of fixing your old unit or replacing it with a new one. To initiate a warranty claim, please contact AudioControl and we will issue an RA (Return Authorization) number and provide shipping instructions. Products received at AudioControl without an RA number will be refused.Legalese Section This is the only warranty given by AudioControl. This warranty gives you specific legal rights that vary from state to state. Promises of how well your AudioControl component will perform are not implied by this warranty. Other than what we have covered in this warranty, we have no obligation, express or implied. Also, we will not be obligated for direct or indirect consequential damage to your system caused by hooking up your AudioControl component.Failure to properly register your AudioControl warranty may negate any service claims. Additional Notes We recommend having a professional certified technician handle the installation. For any questions or concerns about the product, please contact us through the "Contact Seller" feature for technical support or customer assistance.

Price: 229 USD

Location: San Juan, Puerto Rico

End Time: 2024-09-12T02:46:23.000Z

Shipping Cost: N/A USD