Complete Kit Hot Wheels Matchbox 1/64 Scale Customization Restoration

Description: ITEM DESCRIPTION: Complete Kit Hot Wheels Matchbox 1/64 Scale Customization Restoration Screw Length: 20PC 1/8th, 20PC 3/16th, 20PC 1/4th.Replacement Rivet: 30PC Dome Head, 30PC Flat Head Included Is: 60PC Screws, 60PC Replacement Rivets, 50PC Washers, 1PC Tap Handle, 1PC 2-56 Tap Coarse Thread HSS, 1PC 1/8th Drill Bit HSS Double Ended, 1PC 1/16th Drill Bit HSS, 5 Sets Of Wheels With Rubber Tires (Randomly Picked, Over 20 Styles/Colors/Sizes), 10 Sets Of Evolved Rides Ez-2-Swap Axles 32mm (0.8mm Diameter For Hot Wheels/Matchbox), 10 Sets Of Evolved Rides Replacement Axles 33mm (1.2mm Diameter For M2 Machines/Greenlight) 40PC Wheel Spacers 1.3mm. This Kit Includes Enough Axles For 20 Different Vehicles, Enough Screws For 30 Vehicles, Enough Replacement Rivets For 30 Different Vehicles, Enough Wheels For 5 Different Wheel Swaps. ------------------------------------------------------------------------------------------------------------------------------------------------------------ SCREW INFO: Phillips Head- NO Special Screwdriver Needed.Stainless Steel - High Strength Corrosion Resistant And Still Magnetic, No Need To Worry About Rust, And Screws Stick To Magnetic Screwdrivers. Step 1: Drill 1/16th Pilot Hole Into Post On Car/Truck Body.Step 2: Use Tap To Tap Threads In Pilot Hole. ------------------------------------------------------------------------------------------------------------------------------------------------------------Replacement Rivet Info:Rivet Head Measures Approximately 1/8th In Diameter, The Length Of The Post Are Approximately 3/16th Long.Step 1: Drill 1/16th Pilot Hole In Post On Car/Truck Body.Step 2: Trim Replacement Rivet With Plyers If Needed.Step 3: (Method Without Glue) Slightly Crimp Replacement Axle, Then Insert Into Pilot Hole, If Too Loose Crimp More, If Too Tight Replacement Rivet Can Be Filed To Fit. (Method With Glue) Place A Small Dab Of Glue Onto Replacement Rivet And Insert Into Pilot Hole.------------------------------------------------------------------------------------------------------------------------------------------------------------ TAP INFO: #2-56 | High Speed Steel Step 1: Use 1/16th Drill Bit To Drill Pilot HoleStep 2: Use Tap To Slowly Tap Threads, You May Need To Back Tap Out A Couple Times During Tapping To Clean Off Metal Chips.IMPORTANT NOTE: Taps can break/snap very easily if Bent OR Over Torqued, When Tapping threads go slowly and try to keep the tap as straight as possible. ------------------------------------------------------------------------------------------------------------------------------------------------------------ DRILL BIT INFO: High Speed Steel | 135° Degree Tips 1/8th Drill Bit Used For Removing Rivet Head 1/16th Drill Bit Used For Drilling Pilot Hole For Evolved Rides #2-56 Screws & Evolved Rides Replacement RivetsIMPORTANT NOTE: When drilling DO NOT use excessive force, or let the drill bit get too hot. Excessive force will cause the drill bit to bend and snap, getting too hot will dull the end of the drill bit, and sense your drilling into a soft metal the drill bit flutes may need to be cleaned, the soft metal can wrap around the bit causing it to stick to the flutes of the drill bit making the drilling process take longer/overheat. ------------------------------------------------------------------------------------------------------------------------------------------------------------ Ez-2-Swap Axle Info: NO Dremel Required & NO Glue Required. Change your mind on your Wheel Set Up/Camber? Easily swap them out! Instructions On How to Use: Step 1: Use A Pair of Plyers To Crimp The End Of The Ez-2-Swap Axle Then Insert It Into Wheel, The Crimped End Prevents The Wheel From Falling Off. Step 2: Slide Ez-2-Swap Axle With Wheel On It Into Axle Slot On Car Base, Insert Other Side Of Ez-2-Swap Axle Into Other Wheel, Measure And Cut With Plyers. Step 2 Alternative: Set Ez-2-Swap Axle Onto A Flat Surface, Set Utility Knife/X-Acto Knife Onto Ez-2-Swap Axle, Roll Ez-2-Swap Axle While Scoring A Line Around It, Snap Apart. Step 3: Crimp Other End Of Ez-2-Swap Axle To Lock Both Wheels On. IMPORTANT NOTE: When cutting use sharp plyers, dull plyers might crimp Ez-2-Swap Axle and prevent wheel from going on. ------------------------------------------------------------------------------------------------------------------------------------------------------------Replacement Axle Info:Step 1: Press One End Of Axle Into WheelStep 2: Insert Wheel/Axle Into Car Axle SlotStep 3: Measure And Trim Replacement Axle To SizeStep 4: Press Other Wheel Onto Replacement AxleIMPORTANT NOTE: If Your Having Issues Pressing Replacement Axle Into Wheels, Use A File To Round Over The End Of Replacement Axle.------------------------------------------------------------------------------------------------------------------------------------------------------------ EVOLVED RIDES SPECIAL SALE/OFFER:First Time Buyers Will Receive 1 Free Item, Orders over $25 will receive a 1 Free item, Orders over $50 will receive 3 Free items, Orders over $70 will receive 5 Free items, Orders over $100 will receive 10 Free items. Return Customers Will Also Randomly Get Freebies In Their Order Regardless Of Final Sell Price. Sales Tax Is NOT Added To "Freebie" Price Deal (MUST Be $25 OR More Excluding Sales Tax)------------------------------------------------------------------------------------------------------------------------------------SHIPPING INFO:WILL BE SHIPPED SECURELY IN BOX WITH TRACKINGOrders are processed & shipped same, or next business day of purchase (If we are experiencing a high volume of orders) Orders are not processed or shipped from Friday, 4pm PST through Sunday, or holidays.Shipping takes 2-5 Days, Holidays my cause a 1-3 day delay in shipping/handling time.Evolved Rides offers combined shipping for most of the items listed for sale, if you have an order & want to add to it check to see if the tracking number has been added, if it hasnt been added I can combine your orders and give a partial refund for shipping, add a note to your 2nd order asking for combined shipping. Please ensure you provide the correct address at checkout, Evolved Rides will not be held responsible if the customer provides the wrong shipping address, & Evolved Rides is not liable for any products lost during shipping. Evolved Rides aims for customer satisfaction, so if you have any questions/concerns with your order please reach out and Evolved Rides will try to answer any questions/resolve any issues you have with your order. Evolved Rides also offers 1/64 SCALE Real Rider Wheels, Wheel Spacers, Mufflers, Bucket Seats, Custom Base Plates, Custom Clear PVC Window Sheets, Mesh Wire Sheet For Grills/Etc, Axle Sets, Ez-2-Swap Axle Sets & Ez-2-Swap Axle Tubes, & Much More!

Price: 64.99 USD

Location: Kennewick, Washington

End Time: 2024-08-12T13:50:24.000Z

Shipping Cost: 7.99 USD