Elgin E1840P "Sloppy Stage 2" Cam Package - 228/230 .585"/.585"

Description: Untitled DocumentView StoreFeedbackElgin E1840P "Sloppy Stage 2" Cam Package - 228/230 .585"/.585" The Elgin E1840P is the "original" Sloppy Stage 2 camshaft, made famous by the OG sloppy mechanic himself, Matt Happel. This camshaft is an excellent choice for guys looking to put together a proven street/strip combination on a budget. This camshaft has a fairly aggressive profile, so it will have a noticeably choppy idle and perform really well throughout the majority of the mid and upper RPM range. We recommend pairing this camshaft with a converter that has a stall speed of 2800 RPM or higher. Our package uses a Genuine Elgin E-1840-P camshaft, Genuine PAC Racing Springs, Hardened Chromoly .080 wall 5/16 diameter pushrods, and optional OEM style valve seals and/or cam installation gasket set. Elgin E1840P "Sloppy Stage 2" Camshaft Kit Includes Your Desired Combination Of:Elgin E1840P Camshaft - Specs: 228/230 .585"/.585" 112 LSAPAC-1218 Drop-In Beehive Spring KitHardened Chromoly 7.400" 5/16" Diameter PushrodsOEM Style Beehive Valve Hat SealsCam Install Gasket Kit (Timing Cover Gasket, Water Pump Gaskets, Front Crank Seal, GM Crank Bolt) These camshafts have a 3-bolt timing gear pattern. *The SSII camshaft will require upgraded springs and cannot be used with factory springs. The PAC1218 spring kit will require hardened pushrods and is not compatible with factory pushrods due to spring pressures.* NOTE: The optional valve spring kit utilizes OEM hardware. RETURNSPlease read the listing entirely as returns are typically not accepted and may be subject to a 20% restocking fee. If you have any questions or are unsure of something, please ask before purchasing. Cancellations will not be made for purchasing errors. It is the buyer's responsibility to make sure that they enter the correct shipping information at the time of purchase. Once an item has shipped, we can not make edits to the shipment, including the shipping address provided.SHIPPINGMost items ship in 1-2 business days. Shipping is available for customers outside of the Contiguous United States, please contact us for the best and most accurate rate quote. This item is not eligible to be shipped to California residents due to C.A.R.B. regulations.PAYMENTS LEGALAll images and text contained within this listing are protected by intellectual property copyright law and are intended for the sole use of Glenn's Auto Performance. Our Terms of Service Agreement and Privacy Policy are available for your review by visiting our website.

Price: 309.99 USD

Location: Pinellas Park, Florida

End Time: 2024-07-25T21:13:45.000Z

Shipping Cost: 0 USD

Product Images

Elgin E1840P "Sloppy Stage 2" Cam Package - 228/230 .585"/.585" - Chevy LSx

Item Specifics

Return shipping will be paid by: Buyer

Returns Accepted: Returns Accepted

Item must be returned within: 30 Days

Refund will be given as: Money back or replacement (buyer's choice)

Return policy details:

Interchange Part Number: Gen 4, Silverado, Sierra, Camshaft, SS2, Sloppy Mechanics, Chevrolet, LS1, LS2, LS6, LQ4, LQ9, LM7, L33, 4.8L, , 5.3L, 5.7L, 6.0L, 6.2L, 4.8, 5.3, 5.7, 6.0, 6.2, E-1840P, 1840P, E-1840-P

California Prop 65 Warning: WARNING: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects or, other reproductive harm. For more information, visit www.P65Warnings.ca.gov WARNING: It is illegal to install any aftermarket part that alters or modifies the original design or performance of the motor vehicle pollution control system unless the part is exempted or has an Executive Order issued by the California Air Resources Board (also commonly referred to as the "EO" number). Confirmation: By completing your purchase, you acknowledge that any NON CARB-approved products will be installed for off-road competition use only. Furthermore, by acknowledging you understand the above notice regarding CARB-approved products, and accept responsibility for compliance.