Fit For BMW INPA K+DCAN OBD2 USB Interface Cable With Switch EDIABAS NCSEXPERT

Description: Product Description Latest Versions and Support Systems: Applicable to WINDOWS XP, or WIN7 32-bit, not other systems Feature: * High quality cable with green PCB board with switch on the cable. *Easy to follow the installation instructions that come with the cable. Basically a "one-click" install, no setup required Puzzled! *While this cable will work with the car (using the ISTA procedure provided above), the procedure Included below is work from 1996-2009. * Connect to USB *(1.5 m cable, creates virtual COM port) * Support double K line * Support high-speed CAN (500 kbit/s) * Supports low speed CAN PT (100 kbit/s) * Detect battery voltage through control line * Detect contact via control wire *For USB port. Program: - INPA 5.0.6 - EDIABAS 7.3.0 - NCS Expert and NCS Dummy - EDIABAS Tools 32 - WinKFP 5.3.1 - BMW Coding Tool - USB driver for cable Function: -- Easily switch between old and new models --Read and erase error codes --adaptation - encoding --Double K line support --High-speed D-CAN and PT-CAN support --Low-speed PT-CAN support --Detect battery voltage through control line --Detect ignition voltage through control line --Flash data upload and download --input/output control --CAN BUS mode simulation --FTDI FT232RL Chipset Supported Models: K-CAN models: BMW 1 Series E87 BMW 3 Series E46 E83 E90 BMW 5 Series E39 E60 E61 BMW 6 Series E63 E64 BMW 7 Series E38 E65 E66 BMW X Series E53 BMW Z series E85 E52 D-CAN Models: After E60, E61 3 / 2007 Post E83 9/2006 After E81, E87 3 / 2007 After E90, E91, E92, E93 3 / 2007 E53 E70 (New X5) R56 (New Mini) Package Included: 1 x INPA / Ediabas K+DCAN USB port 1 x CD software driver Note: Only support WINDOWS XP and WIN7 32 (others products are not applicable, please check your product model before purchasing)

Price: 22.89 USD

Location: SHANGHAI

End Time: 2024-10-28T13:27:33.000Z

Shipping Cost: 0 USD