Description: 3d printed Medusa Head for 1.0 Mythic Legions Printed in Resione M70 Designed by Jason Demon Customs & Designs https://www.instagram.com/jason_demon_3d_studio/ The ( ) Signifies a JsArmory Part Bin Location The heads are sized to pop on Mythic Legions 1.0, if you want to use it on a different neck, please refer to the instructions below. Heads will need to be fitted for the figure you choose. You can get away with sticky tack on the ball peg but a more permanent solution is best. Dremeling, putty, etc may be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole. NO FIGURES ARE INCLUDED. ONLY THE HEAD. There will be differences and imperfections in each piece including small flaws in prints. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Thank you so much for considering a purchase! All hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!
Price: 13.99 USD
Location: Roseville, California
End Time: 2024-11-28T08:39:53.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Return policy details:
Type: Does Not Apply
