Description: Get our universal premium quality dental ceramic alloy Neocast-V now for the new best priceMade In The USA The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item. Neodontics Inc. 9775 Glenoaks Blvd., Suite H Sun Valley, CA 91352 U.S.A. Telephone United States Callers : (800) 544 7248 International Callers: 1 (818) 767 2730Material IdentificationNickel-Chromium Base Alloy for VITA & VITA type porcelainMaterial NameNeocast VSection IIIngredients & HazardsIngredientsCas #% Composition by weightNickel (Ni)(7440-02-0)71-73%Molybdenum (Mo)(7439-98-7)8-10%Chromium (Cr)(7440-47-3)12-15%Aluminum (Al)(7429-90-5)2%Cobalt (Co)(7440-48-4)<1%Beryllium (Be)(7440-41-7)1.65% max.Titanium (Ti)(7440-32-6)<1%Hazard DataFor pure Beryllium (Fumes & Dust)8 hr. TLV-2mg/m³Ceiling level-5mg/m³Max. for 30 Min.-25mg/m³For pure Molybdenum (Fumes & Dust)8 hr. TLV-5mg/m³Pure Nickel & Chromium (Fumes & Dust)8 hr. TLV- 1mg/m³Section IIIPhysical DataMelting Range2177º - 2329ºF (1192°-1276°C)Specific gravity7.9 gm/cm³Solubility in waterNoneAppearanceA silver/platinum colorOdorlessSection IVFire & Explosion DataThese alloys are fire and explosion resistantSection VReactivity DataAt high temperatures, these alloys will oxidize, but are stable. At very high temperatures, these alloys may produce fumes.Section VIHealth Hazard Information TLV (See Section II)These alloys contain Nickel, Chromium, Molybdenum, Aluminum, Beryllium (1.8% Max.), and traces of Cobalt. University studies have established that alloys in these categories are not only biocompatible, but clinically safe as well. The alloy in solid form is generally not considered hazardous. Grinding, melting, cutting or any other process that releases dust or fumes can produce hazardous levels and should be avoided.First AidEye ContactFlush eyes Thoroughly with running water, even under eyelid.Skin ContactFlush skin and scrub thoroughly with soap and water.InhalationRemove person to fresh air. Assist breathing with additional oxygen if necessary.Section VIISpill or Leak ProceduresRemove dust by vacuuming or wet sweeping to prevent powdering in the air. Wear respirators and protective clothing. Use disposable containers. No special precautions are required for bulk (solids) shapes, such as ingots and buttons.Section VIIISpecial Protection InformationGeneral and local ventilation and exhaust filtration should be employed. Respirator, goggles, gloves, and coveralls or protective clothing should be used. Also, periodic physical examinations should be taken.Section IXSpecial PrecautionsAvoid inhalation of fumes and dust. Avoid skin contact. Wear protective clothing. This alloy contains Beryllium. Beryllium dust can be toxic. Do not inhale. Grind and polish with adequate ventilation only. This alloy contains Nickel and should not be used for individuals with known Nickel sensitivity. Dust containing Nickel should not be inhaled. Melting and fabrication of this alloy should be done in the presence of adequate ventilation.Additional Precautionary Notes:First Aid MeasuresIf dusts or smokes are inhaled, sufficient fresh air should be provided. In case of eye contact, eyes should be rinsed thoroughly for several minutes under running water. If ingested or swallowed, a doctor should be consulted immediately.Fire Fighting MeasuresThe material is inflammable and not oxidizing. In case of large quantities of dust, the danger of a dust explosion is present. Toxic reaction may occur by high temperatures. All extinguishing agents are suitable. Favorable are sodium chloride and dry sand.Handling and StorageBy appropriate application, no special measures are needed for handling or storage. Sufficient suction should be guaranteed.Exposure Controls and Personal ProtectionRespiratory protection can be maintained by ensuring suitable suction, and if applicable use respirator or filter. If necessary, use safety goggles for eye protection. Protective gloves can provide hand protection and prevent certain known allergies of alloy components, such as Nickel. During working with alloy and metals, do not eat, drink, smoke or snuff tobacco. Regarding legal instructions for working hygiene, wash face and hands before break and/or of work.Stability and ReactivityIn case of contact with acids, the formation of hydrogen is possible. Dusts due to processing (e.g. casting, grinding) in extreme cases may cause dust explosions.Toxicological InformationNo dangerous reactions are known to occur with correct handling and storage.Ecological InformationNormally chemical substances which accumulate as residual material, are special refuses. The removal is defined by legal waste management laws and corresponding regulations. In case of doubt, contact the public authorities. Prevent from dumping materials into soil, water, and drainage system.
Price: 70 USD
Location: Sun Valley, California
End Time: 2024-04-04T21:47:10.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Model: Neocast-V
Country/Region of Manufacture: United States
Type: Dental Ceramic Alloy
MPN: Does Not Apply
Brand: Neodontics
Intended Use/Discipline: Dental Alloys, Ceramic Alloy, alloy, partial alloy, dental, dentist, Partial, Denture, Partial Denture, partial denture alloy, Chrome, Cobalt, Anesthesiology, Biological Laboratory, Cardiology, Cosmetology, Dental Laboratory, Dentistry, Emergency Medicine
Available Variations
Color: 10 oz. (284 g.)
Price: 70 USD
Available Quantity: 500
Quantity Sold: 19
