RV Anode Rod for Hot Water Heater, 20-Year Warranty Powered Anode, Permanently S

Description: FOR RV (RECREATIONAL VEHICLES) ONLY - This Corro-Protec for RV is designed to protect your RV Suburban water heater and Mor-Flo. This is NOT for residential, commercial, or industrial application.HASSLE-FREE HOT WATER - Corro-Protec’s RV powered anode rods are revolutionizing the water heater maintenance by preventing and solving numerous water heater problems.SAY GOODBYE TO ODORS - Eliminate your RV water heater odor problem by removing the rotten egg smell in hot water with our advanced powered anode rod.PERMANENT CORROSION PROTECTION - Designed to replace your RV Suburban or Mor-Flo water heater’s hex head anode rod, it can defend against any level of water hardness, including the increased corrosiveness of softened water.MAXIMIZE ENERGY SAVINGS - Our energy-efficient design combats sediment build-up, enhancing water quality and prolonging tank life while saving you money on energy bills.INSTALLATION SIMPLIFIED - We’ve included comprehensive, easy-to-follow step-by-step instructions, ensuring a smooth installation process of your RV water heater anode rod.20-YEAR WARRANTY & QUALITY - Manufactured in Canada, our RV hot water heater anode rod is not only backed by a 20-year warranty but also extends the life of your tank.SAFE WITH ALL WATER SOURCES & TREATMENT SYSTEMS - Corro-Protec anodes are safe with any water sources - city and well water - and water treatment systems such as water softeners, including filtration and reverse osmosis.MAXIMUM DURABILITY WITH TITANIUM - Forget about the constant replacement of aluminum anode rods or magnesium ones—our titanium-made powered anode rod is maintenance-free and is made of materials that do not disintegrate.LITTLE CURRENT, HUGE BENEFITS - Enjoy the extensive benefits of Corro-Protec with minimal energy expenditure - less than $3 annually across the United States, designed to connect to a standard 120V power outlet. Product Description Suburban and Mor-Flo water heater powered anode rod installation into the regular outlet. Step 1 – Prepare Turn off powerTurn off water supplyRemove the magnesium anode with the 1" 1/16 socket Step 2 – Install Install Teflon tape on the lower portion of the Corro-Protec powered anode rodInsert and screw the Corro-Protec with the 1" 3/16 socket Step 3 - Plug it Install the ground on the hot water tankConnect the Corro-Protec Anode to the power supplyConnect the power supply to a regular outlet 24-HOUR ROTTEN EGG SMELL ELIMINATION IN HOT WATER Corro-Protec will remove the sulfur smell from well water and city water and is especially effective in hot water. No matter what causes the sulfur odor in your hot water, the Corro-Protec powered anode rod offers a reliable and cost-effective solution for neutralizing it. Moreover, it is a time-efficient answer to your problem, as it requires no maintenance and does not involve the use of chemicals like hydrogen peroxide or bleach. Once the system is operational, the energy projected by our powered anode rod will prevent these unpleasant smells for years to come! If the foul smell also originates from the cold water, it means that your water source is contaminated. In that case, Corro-Protec will help by reducing the odor in hot water but won't solve this issue in cold water. Sulfur smell in hot water is a common issue around North America and affects both new and old water heaters. Rest assured, Corro-Protec is your trusted solution to effectively eliminate this persistent problem. STOPS CORROSION INSIDE THE TANK & PREVENTS WATER HEATER LEAKS Our Corro-Protec anode combined with the electrical current will provide added corrosion protection and increase the lifespan of your hot water tank. Our technology provides a layer of permanent corrosion protection on the internal solders and weak points of the tank. This technology is recognized by corrosion specialists and has been laboratory tested. We believe that powered anode rods should be installed in all water heater tanks to increase their lifespan. Replacing magnesium or aluminum anodes every year ensures a protection from corrosion; however, the use of material depleting returns to diminishing effectiveness over time. Moreover, powered anode rod greatly reduces the amount of water heater parts in the landfill every year when corrosion takes over and damages the tanks. Postponing disposal is essential for promoting sustainable practices. REDUCES SEDIMENT BUILDUP AND LIMESCALE The formation of limescale can cause a variety of costly issues, including the rehabilitation of water pipes and heating installations, as well as considerable energy losses. The Corro-Protec powered anode is then used to break apart calcium molecules found in the water, preventing further calcite formation and compromising the formation of limescale which is usually left behind by hard water when it evaporates (water with high mineral count). Limescale water can have negative impacts on the scalp and causes brittle and dull hair. CLOUDY WATER AND AIR IN HOT WATER LINES Air in hot water lines is a common problem and can be caused by various factors. Corrosion inside water heaters is one of the most common causes, as it produces hydrogen which builds up and is released when hot water is used. Corro-Protec powered anode rods prevent and stop the corrosion process inside the tank. Factory-installed magnesium anodes may also produce some hydrogen; however, it usually has no impact on water pressure. Finally, turning off the water supply or performing maintenance work can also allow air to enter the system. Stop corrosion and the bubbles all at once! Sulfur smell in hot water Corrosion in tank and water heater leaks Sediment buildup and limescale Air in hot water lines and cloudy water Add to Cart Add to Cart Add to Cart Add to Cart Customer Reviews 4.2 out of 5 stars 112 4.2 out of 5 stars 112 4.7 out of 5 stars 6,367 4.5 out of 5 stars 315 Price $99.95$99.95 $119.95$119.95 $159.95$159.95 $179.95$179.95 Type of water heater Recreational Vehicule (RV) Recreational Vehicule (RV) Residential / Home Residential / Home Compatibility with RV water heater Suburban, Mor-Flo and other RV tank with 3/4" thread Suburban, Mor-Flo and other RV tank with 3/4" thread (none) (none) Rectifier / Power supply 12-foot cord, 5 mA. To be connected into regular outlet. 12-foot cord, 5 mA. To be connected on 12V RV Battery 12-foot cord, 15 mA 12-foot cord, 15 mA Permanent Corrosion Protection ✓ ✓ ✓ ✓ Works with all types of water (well water, city water, water softener...) ✓ ✓ ✓ ✓ Anode Rod Size Regular with smaller head to fit RV tank Regular with smaller head to fit RV tank Regular Regular with smaller head to fit residential hot water outlet wye Quality promise 20-Year 20-Year 20-Year 20-Year Powered RV anode rod made of titanium AVOID REPEATING THE SAME MISTAKE WITH A TEMPORARY SOLUTION. When a hot water tank is exposed to corrosive water, the magnesium anode will transfer electrons to the inner side of the hot water tank to protect it. The anode will slowly break up. After a few months or years, there will be no more protection for corrosion. Sacrificial anode made of magnesium, aluminum and/or zinc: Are affordable but provides only temporary corrosion protection for your water heater Can cause Rotten Egg Smell issue in Hot Water Powered RV anode rod made of titanium A PERMANENT SOLUTION DESIGNED AND TESTED TO LAST MORE THAN 20 YEARS. All you need to do is replace the original anode with the Corro-Protec and simply connect the current rectifier. Our Corro-Protec combined with electrical current will provide improved corrosion protection and increase the life of your water heater. Powered anode rod for RV water heater: Doesn’t require any maintenance Are made of stable materials that do not disintegrate Generates permanent protection instead of temporary protection Prevents hot water problems such as Corrosion, Sulfur/Rotten Egg Smell in Hot Water, Sediments Accumulation and Air in Hot Water Lines. Powered anode rod for Suburban and Mot-Flo water heaters. COMPATIBLE WITH ALL SUBURBAN AND MOR-FLO Suburban and Mor-Flo anode rods have a 3/4" thread. The Corro-Protec powered anode rod you have selected also fits a 3/4" thread, just like Suburban and Mor-Flo. If you have an Atwood water heater, the model you selected will not fit your tank, since Atwood water heaters have a 1/2" thread. THIS POWERED ANODE ROD MODEL CONNECTS TO REGULAR OUTLET This 120V model is best for: People who have access to power most of the time by plugging their RV in a 120V outlet or a generator. Our other model which is 12V is best for: People who are on the road most of the time or with no access to a 120V outlet or a generator. If you need the 12V, please change your actual product variant selection at the top of the page. CORRO-PROTEC IS HIGHLY RECOMMENDED IF YOU HAVE A WATER SOFTENER Corro-Protec anodes are safe with any water sources (city and well water) and water treatment systems (water softener, filtration, reverse osmosis, etc.). It's worth knowing that water softeners can be very aggressive in causing corrosion because soft water is conducive, and thus prone to, corrosion. The Corro-Protec powered anode rod will automatically adjust its current to provide optimum corrosion protection.

Price: 138.29 USD

Location: West Palm Beach, Florida

End Time: 2024-11-19T15:52:06.000Z

Shipping Cost: 0 USD